David I. Verrelli; Formaldehyde from Methanol; CHE4117 final year Design Project report; Department of Chemical Engineering, Monash University; Melbourne, Australia; 1999: circa 250 pages. ERRATA ------ (Identified by D. I. Verrelli as at 26 January 2017.) General issues: * Used en-dashes where em-dashes may have been preferable (e.g. "This [...] conversion – around 77 to 87% [...]." should have been "This [...] conversion — around 77 to 87 % [...]." on page 3-4). * No spacing between values and units of physical parameters (e.g. "500mm" should have been "500 mm" on page 10-8). * Variable symbols (pronumerals) were incorrectly set roman instead of italic in most cases (such as in Chapter 7); correct typesetting was used in Chapter 12. Misprints: vii: Inconsistent formatting of sub-headings in table of contents for Chapter 10 (should be all-caps). viii: Inconsistent formatting of headings in table of contents for back matter (should be all-caps). [Sub-heading formatting is OK.] 4-1: Text in §4·2·1·1 "following" should be "following it". 4-2: Various misprints in the original source of Figure 4-1 have been reproduced. 4-3: Text in §4·2·1·3·1 "as long seal" should be "as long as seal". 5-1: Top row of table in footnote should be more clearly identified as the header row. 5-10: Text in §5·4·5 "effect" should be "affect". 7-12: Text in §7·1·4·3·2 "yielded a values" should be "yielded values". 7-16: Inconsistent formatting of "Olbrich" in §7·2·3·1·1 (should be small-caps). 8-1: Text in §8 "piping and instrumentation" should be "piping and instrumentation". 9-2: Inconsistent formatting of chapter name in header. 11-1: Text in §11·1·2 "for needed for" should be "needed for". 11-1: Text in footnote "being a being" should be "being". 11-2: Misspelling of "formaldehyde" in Figure 11-1. D-7: In title block "BY", "DATE" and "DESCRIPTION" should have been centred.